BHG Forklift Training

Forklift Training & Certification in Marietta, Georgia

Marietta, Georgia is where Lockheed Martin builds the C-130J, and the rest of Cobb County has a strong concentration of wholesale distributors, including Genuine Parts (NAPA) and HD Supply. BHG Forklift Training comes to your Marietta-area facility and trains and evaluates your operators on your own trucks.

  • OSHA Classes 1–7
  • Training at Your Facility
  • Hands-On Evaluations
  • Certification Records
Request Forklift Training

Forklift Operator Training in Marietta

Georgia's Department of Economic Development marked 75 years of Lockheed Martin production in Marietta in June 2026, noting that the 8-million-square-foot site builds the C-130J Super Hercules and F-35 center wing assemblies and that the company is adding 1,200 Marietta jobs. Cobb County's economic development office says the county draws aerospace suppliers that want to sit near Lockheed and Dobbins Joint Air Reserve Base, alongside a strong concentration of durable goods wholesalers. Both groups rely on forklift operators every shift.

Georgia has no OSHA State Plan covering private employers, so a Marietta warehouse or plant is under federal OSHA and follows 29 CFR 1910.178 as written. OSHA assigns Cobb County to its Atlanta West Area Office. The practical question for most Cobb employers is not which rule applies but whether each operator has been trained and evaluated on the specific trucks and conditions in their building.

BHG Forklift Training, a service of the Hannibal, Missouri company BHG Safety Partners LLC, handles that at your facility. Operators get classroom instruction, hands-on practice and an individual evaluation while doing their actual job on your trucks, and sessions can be run in English or Spanish. When they pass, your company certifies them. BHG covers all seven truck classes in the same visit.

Where Forklifts Work in Marietta

  • Aerospace manufacturing and suppliers

    Lockheed Martin produces the C-130J and the F-35 center wing assembly in Marietta, and Cobb County markets itself to first and second tier suppliers that want to be close to Lockheed. Aircraft parts are large, costly and often awkwardly shaped, so operators need to understand load center, attachments and spotters, and slow travel around tooling and assembly areas.

  • Wholesale distribution centers

    Cobb County lists Genuine Parts Company (NAPA) and HD Supply among its major wholesale companies, both headquartered in the county, and describes office-warehouse space ranging up to buildings of more than 100,000 square feet. Parts and supply distribution depends on order pickers, reach trucks and pallet jacks in racked aisles, where elevated picking, rack strikes and pedestrian traffic top the list of hazards.

  • Foodservice and refrigeration

    Reinhart Food Service and Hussmann both appear on Cobb County's wholesale trade list. Foodservice distribution means moving between freezer, cooler and dry storage all day, so operators need practice with condensation on floors, cold exposure and battery trucks working at low temperatures.

What Shapes Forklift Safety in Marietta

  • Federal OSHA covers private employers in Marietta and the rest of Cobb County, since Georgia does not run a State Plan for the private sector. The forklift rule is 29 CFR 1910.178, with training on each truck type and a performance evaluation at least every three years.

  • A Cobb County company with a second building in Cherokee County deals with two federal area offices: Atlanta West for Cobb and Atlanta East for Cherokee. The standard is the same, but inspections and complaints go through different offices.

  • The National Weather Service office in Peachtree City says north Georgia outside the mountains can expect 90 degrees or higher on 30 to 60 days a year and about 120 days with measurable rain. Heat in trailers and on outdoor yards, and wet dock approaches after summer storms, should shape how and when operators do outdoor loading.

Forklift Classes Marietta Employers Need Most

All forklift classes
Client Questions

Marietta Forklift Training Questions

We get a lot of the same great questions from new clients. Here are the answers to the ones we hear most often — if yours isn't listed, don't hesitate to reach out directly.

BHG Forklift Training instructor leading an onsite training session

Onsite Forklift Training Session

Federal OSHA's Atlanta West Area Office, at 1995 North Park Place SE, Suite 525, in Atlanta. OSHA's Georgia county list assigns Cobb County to that office. Georgia has no State Plan covering private employers, so 29 CFR 1910.178 applies directly. If you also run a site in Cherokee County, that one falls under the Atlanta East Area Office instead.
The standard topics, plus the loads you actually move. Long, light or oddly shaped parts shift a truck's load center, and many shops use attachments, fork extensions or spotters for them. Operators should read the capacity plate for the truck as equipped and be evaluated moving your real parts through your aisles. BHG runs that training and evaluation at your facility.
Yes. OSHA requires training on each type of truck an operator uses, and a Class 2 order picker lifts the operator along with the load, which brings fall protection and overhead clearance into play. Someone who is qualified on a sit-down Class 1 truck still needs training and an evaluation on the order picker. BHG covers each class your Marietta distribution center runs.
Refresher training is required when workplace conditions change in a way that affects safe operation, and a new building with different racking, aisle widths, dock layouts or traffic patterns usually qualifies. Otherwise each operator needs an evaluation at least every three years. BHG can train and evaluate your crew in the new building before or right after the move.
About BHG

Your Safety. Our Mission.

BHG Forklift Training trains and evaluates forklift operators at your facility, on your own trucks. Our instructors bring decades of hands-on experience in warehouses, distribution centers, manufacturing plants and construction sites.

Our approach is simple: we listen first. Every facility has its own trucks, layout and traffic patterns. We build each session around your equipment, your aisles and docks, and your shifts — so your operators train for the work they actually do.

From Class 1 electric riders in the warehouse to Class 7 rough terrain forklifts on the job site, we cover every OSHA truck class, from our base in Hannibal, Missouri to employers across 17 states in the Midwest and South, in English or Spanish.

Trusted Since 2014
Disabled Veteran-Owned Small Business

Get in Contact with us Here!

Fill out the form below and we'll be in touch within one business day.

Get a Quote